Airpods Connected but No Sound

Airpods are wireless headphones meant to connect to your phone and give sound. But what happens when you have AirPods connected but no sound? This is the question that will be explained in this article with their causes and solutions.

If your AirPods are connected, but you do not hear any sound, there are some factors responsible for it. First, ensure that your AirPods are charged and also have their volume up on both your device and the AirPods themselves. 

You can also try disconnecting and reconnecting your AirPods to see if that fixes the issue. If you’re still having trouble, you may need to reset your AirPods by following these steps:

  • Press the setup button that is at the back of the AirPods charging case for at least 15 seconds.
  • Open the lid of the charging case before pressing and holding the setup button again for at least 15 seconds.
  • Your AirPods will reset, and you can try to connect them to your device again.

If you’re still having trouble, there’s an issue with your AirPods or your device, and you may need to contact Apple for further assistance or try one of the resets given below.

Airpods Connected but No Sound

Airpods Connected but No Sound

If you’re using your Airpods and they’re connected, but no sound is coming out, there are a few possible reasons and solutions.

1. Reset Your Airpods

Your Airpod can cause you to be experiencing sound issues with your Airpod.

To reset your AirPods, follow these steps:

  1. Long press the button at the back of the case for at least 15 seconds.
  2. Release the button when the light starts flashing amber a few times, then flashing white.
  3. Your AirPods are now reset, and you can pair them with your device again.

If you’re having trouble resetting your AirPods, try these additional steps:

  1. Make sure that your AirPods are in their case and that the case has enough charge.
  2. Long press the button at the back of the case for at least 20-30 seconds.
  3. Release the button when the light flashes amber a few times, then flashes white.
  4. Perform Airpods Bluetooth and iPhone Reset

There are several other methods you can use to do this, which are listed and explained below.

First Method 

  1. Open your Airpod case and long-press the small button on the back for at least 10-15 seconds.
  2. Release the button, press it again, and hold it for 15 seconds.
  3. Your AirPods will reset, and you should see the status light flashing amber and white on the case.

Second Method 2

  1. On your iPhone, scroll to the “Settings” app.
  2. Tap on “Bluetooth” and make sure that your AirPods are not connected to your iPhone.
  3. Click on the “i” beside your AirPods in the list of Bluetooth devices.
  4. Tap on “Forget this Device” and confirm that you want to forget your AirPods.
  5. Go back to the case where your AirPods come in, and hold the small button on the back for at least 15 seconds.
  6. Release the button, press it again, and hold it for 15 seconds.
  7. Your AirPods will reset, and you should see the status light flashing amber and white on the case.

Third Method 3

Airpods Connected but No Sound

  1. Go to the settings on your iPhone.
  2. Tap on “General,” then tap on “Reset.”
  3. Tap on “Reset Network Settings” and confirm that you want to reset your network settings.
  4. Your AirPods should now be reset, and you should be able to connect them to your iPhone again.

Fourth Method 

  1. Go to your iPhone setting icon, 
  2. Tap on “General” before clicking on “Reset.”
  3. Tap on “Reset All Settings” and confirm that you want to reset your settings.
  4. Your AirPods should now be reset, and you should be able to connect them to your iPhone again.

Fifth Method

Go to the settings on your phone.

  1. Tap on “General” and then click on “Reset.”
  2. Click on “Erase All Content and Settings” and confirm that you want to erase all your content and settings.
  3. Your AirPods should now be reset, and you should be able to connect them to your iPhone again.

2. Update iPhone Software

To update your iPhone’s software, follow these steps:

  1. Ensure that your iPhone has a Wi-Fi network connected to it.
  2. Open the Settings app on your iPhone.
  3. Tap “General” and then click on “Software Update.”
  4. If a new update is available, tap “Download and Install.”
  5. Follow the instructions appearing on the screen to complete the update.

It’s important to always keep your iPhone’s software up to date, as new updates often include bug fixes and security improvements.

3. Turn Off Nearby Devices

Control Center can be used to turn off nearby devices on an iPhone. To access it, use the control center and swipe up on the screen. Then, press and hold the Bluetooth icon to access the Bluetooth settings. From there, you can turn off Bluetooth to disconnect from any nearby devices.

4. Clean Airpods and Charging Ports

To clean your AirPods and their charging ports, you’ll need a soft, dry, lint-free cloth. Gently wipe the exterior of your AirPods, including the charging ports, with the cloth. Avoid getting moisture in the charging ports, and don’t use any cleaning products, as they may damage the headphones.

5. Turn Off Automatic Ear Detection

To turn off the Automatic ear detector, follow these steps:

    1. Check your device’s settings for any options related to ear detection or automatic listening. It may be in the “Accessibility” or “Sounds” settings.
  1. Suppose you cannot find the option to disable ear detection in your device’s settings. In that case, you should check your device’s documentation or support website to see if you need to disable a specific setting or feature.
  2. Suppose you can’t disable the feature through the device’s operating system or firmware. It can typically be done by accessing the “System” or “Device” settings and looking for options related to ear detection or automatic listening.

6. Charge Your Airpods

After all reset options have been done, it’s important to charge the Airpod.

To charge your AirPods, follow these steps:

  1. Find the charging case for your AirPods. The case should have a small LED light on the front. If the light is white, your AirPods are charged. If the light is amber, your AirPods are low on power and need to be charged.
  2. Open the charging case. To do this, long press the button at the back of the case. The AirPods should slide out of the case.
  3. Plug the charging case to a power source. To do this, use the original lightning cable that came with your AirPods. Put one end of the cable into the charging case and the other end into a wall outlet or USB port on your computer.
  4. Place your AirPods in the charging case. The AirPods should snap into place with the left AirPod in the left slot and the right AirPod in the right slot.
  5. Wait for the AirPods to charge. The LED light in front of the charging case will turn from amber to white when the AirPods are fully charged.

Note: It is essential to use your original Airpod Lightning cable to charge them. Using a different cable or charging them with a wireless charging pad may damage the AirPods or cause them not to charge properly.

Read on What To Do While Listening To Music

Airpods Connected to Windows 10 and 11 but No Sound

Airpods Connected to Windows 10 and 11 but No Sound

When you’re having trouble getting sound to play through your AirPods when connected to your Windows 10 or 11 computer, you can consider trying a few things to fix this issue.

First, make sure that your AirPods are charged and turned on. Then, try restarting your computer and your AirPods. If that doesn’t help, try connecting your AirPods to a different smartphone or computer to see if the problem is with the former devices.

But if the problem only occurs when your AirPods are connected to your Windows computer, there may be an issue with your computer’s Bluetooth connection or audio settings. 

To troubleshoot the Bluetooth connection, try resetting the Bluetooth on your computer by going to the “Bluetooth & other devices” settings in Windows and clicking the “Remove device” option for your AirPods. Then, try reconnecting your AirPods to your computer.

If that doesn’t help, try adjusting the audio settings on your computer:

On Windows 10, go to the “Sound” settings to select your AirPods as the default playback device. 

On Windows 11, go to the “Manage audio devices” settings and make sure that your AirPods are selected as the default device for playback and recording.

After doing all those resets and you’re still having trouble getting sound to play through your AirPods, you may need to update the drivers for your computer’s audio hardware. 

You can do this through the “Device Manager” in Windows. Look for the audio device in the list and right-click on it. Then, select the “Update driver” option to install the latest drivers for your audio hardware.

How to Eliminate Common Causes of Airpods Not Playing Sound on Pc

If your AirPods are not playing sound on your PC, there are a few potential causes and solutions to try. First, ensure that your AirPods are charged and that you have selected them as the audio output device in your PC’s sound settings. 

Also, you may need to update the drivers for your AirPods or the Bluetooth device on your PC. If you’re still having trouble, try resetting your AirPods or using a different Bluetooth adapter. 

If everything doesn’t work, you might need to try the following option:

1. Set Airpods as Your Default Audio Output Device

To get your Airpods working with Windows 10 and 11, you’ll need to set them as your default audio output device.

When you set AirPods as your default audio output device on Windows 10 and 11, they will automatically play your audio through the most convenient input device available. It will help you avoid manually adjusting the volume settings on each device.

2. Adjust Audio Balance

The audio balance setting adjusts the balance between the left and right channels. If you have an uneven mix of the left and right channels, your AirPod might not be able to detect sound properly.

To adjust the audio balance:

Click on start, and then write “control panel” in the search box. On the “Control Panel” window that appears, click on “Hardware and Sound” before you then click on “Sound.”

In the “Sound” control panel window, click on “Volume.” In the left column of this window, click on the downward-facing arrow next to “Interactive Volume Control.” This will open a menu with different options. Clicking on one of these options will cause a new window to appear with controls for changing the volume level of each speaker or a selected combination of speakers.

3. Run Audio Playback Troubleshooter

If your AirPods are not playing sound on your computer, follow these steps to troubleshoot the issue:

1. Open the Audio Playback Troubleshooter application.

2. Select the audio devices connected to your computer and click “Get Devices.”

3. Right-click the AirPods and select “Playback” from the context menu. If you see an error message, click “OK” to close the window and then click “OK” again to close the Audio Playback Troubleshooter window.

4. Check and Update Windows Os

To check for updates, locate the Control Panel and click “Windows Update.” If any update is yet to be installed, you will see it on the screen. Click “Check for Updates” or “Install Updates” to install them.

If you still have problems after installing updates, try unplugging your AirPods and plugging them back in again. Then restart your computer and see if that helps with any problems you’re having with your AirPods not working properly with your PC.

5. Ensure Stereo Audio Is Enabled for Airpods

It’s possible that your audio isn’t enabled for the Airpods. To ensure Stereo Audio is enabled for Airpods, follow these steps:

1. Open System Preferences by clicking the Apple logo in the menu bar and selecting System Preferences

2. Select Bluetooth from the left column

3. Select AirPods from the list on the right-hand side of the window

4. Click on the Summary tab at the bottom of this window and make sure that Stereo Audio is enabled

6. Adjust Absolute Volume in Registry Editor

To adjust the audio output of your Mac or PC:

1. Open System Preferences > Sound > Output and select your Mac or PC’s speaker icon.

2. Click on the Volume dropdown menu and select the Absolute Volume option. This will allow you to adjust the output volume without affecting other applications running on your computer (such as games).

Conclusion

For those who say their Airpods are connected but no sound. One solution is to hold down the volume-up button on the headphones, increasing the level of sound coming through. 

And if you try the suggested fixes above, you can have your Pc and Airpod working perfectly together.