How to Clean iphone Speaker

Since many people use their iPhone speakers today, you need to clean them from time to time. There are different methods of cleaning your iPhone speaker. Continue reading to learn how to clean iPhone speaker effectively.

If you find dust and dirt sticking to your iPhone speaker grilles or the interior of your case, use makeup remover pads or a cotton swab to remove any built-up debris gently. Avoid using alcohol-based solutions because they can cause color loss over time.

In addition, use an anti-static cloth and hold the speaker upside down for 30 seconds before handling it because it will help reduce static charge eruption on the surface of the exposed metal area. Avoid touching the dust with your bare hands by washing your hands with water before dealing with any electronic component. 

Finally, Do not press too hard when cleaning because it can scratch the speaker, so be very careful when you’re cleaning.

Check to make sure your iPhone speakers are working

There are a few potential reasons your iPhone’s speakers may not work. The first step is to check the phone volume and ensure it is turned up all the way. 

You can try the following steps if you want to check if your iPhone speakers are working: 

1. Go to the setting icon on your phone, and click Sounds & Haptics.
2. On the “Sounds & Haptics” screen, adjust the volume level to ensure it is not set to the minimum level.
3. Try playing a song or a video with sound on your iPhone to see if the speakers are working.
4. If you still can’t hear any sound, try using the headphones to see if the problem is with your iPhone’s speakers or audio output.
5. If the headphones are working, but the speakers are not, there is likely an issue with the speakers on your iPhone. You may need to repair or replace them.

Alternatively, use the “Voice Memos” on your iPhone to record a voice memo and play it back to see if the speakers are working. To do this, follow these steps:

1. Open the voice Memos on your iPhone.
2. Start recording a voice memo by tapping the red record button to start 
3. Speak into the microphone on your iPhone to record your voice.
4. To stop the recording, Click the red stop button.
5. Tap the play button to play back the voice memo and see if you can hear your voice through the speakers on your iPhone.

If you can still not hear any sound from the speakers on your iPhone, you may need to clean the speakers.

How to Clean iPhone Speaker

There are four ways to clean your iPhone speaker.

1. A soft-bristled brush

You can use a soft-bristled brush and some compressed air to clean your iPhone speaker. 

First, use the brush to remove any debris or dust from the speaker grills gently. Then, hold the compressed air canister and give it a few short bursts of air to remove the remaining debris. 

Don’t apply too much pressure because this could damage the speaker. After cleaning, you can gently use a microfiber cloth to wipe down the speaker grills and surrounding areas.

2. Painter’s tape

To clean the iPhone speaker with painter’s tape, you can follow these steps:

1. Turn off your iPhone and unplug it from any power source.
2. Use a soft, dry cloth to remove visible debris or dirt from the speaker grills.
3. Cut a small piece of painter’s tape about the same size as the speaker grills.
4. Gently press the tape onto the speaker grills and smooth it down so that it adheres well.
5. Use a toothpick or another small, pointed object to remove debris or dirt stuck in the grills. Be careful not to puncture the speaker grills or damage the tape.
6. Remove the tape from the speaker grills and throw it away.
7. Use a clean and a dry cloth to gently wipe away any remaining debris or dirt from the grills.
8. Turn on your iPhone and test the speaker to ensure it works properly.

Note that this method is not guaranteed to work, and using painter’s tape on your iPhone’s speaker grills may damage them.

3. Toothpick

To clean your iPhone speaker with a toothpick, follow these steps:

1. Turn off your iPhone and remove any protective case or cover.
2. Gently insert the toothpick into the speaker grille on the bottom of your iPhone. Don’t push too hard or damage the speaker grille.
3. Gently move the toothpick around in a circular motion to loosen any debris or dirt that may be stuck in the speaker grille.
4. Remove the toothpick and use a soft, lint-free cloth to carefully wipe away any debris or dirt loosened by the toothpick.
5. Repeat the process on the other speaker grille on the top of your iPhone, if necessary.
6. Once you have finished cleaning the speaker grilles, turn on your iPhone and test the speakers to ensure they are working properly.

It’s important to use a toothpick carefully and gently when cleaning your iPhone speaker, as using too much force or pressing too hard could damage the speaker or the speaker grille.

4. Air blower

To clean the speaker on an iPhone with an air blower, follow these steps:

1. Turn off your iPhone and remove the case if you have one.
2. Hold the air blower a few inches away from the speaker grille, which is located on the bottom edge of your iPhone.
3. Gently blow air into the grille for a few seconds.
4. Wipe the grille with a soft, lint-free cloth to remove any debris the air may have loosened.
5. Repeat the process if necessary.

Generally, it’s important to be gentle when cleaning your iPhone speaker, as using too much force or using abrasive materials can damage the speaker grills or even the speaker itself.

 If you’re not confident cleaning the speaker correctly, it’s best to take your iPhone to an Apple Store or authorized repair shop for assistance.

Recommended Post: Is It Bad To Sleep With Airpods In?

What’s Apple’s official advice?

Apple recommends that you use a soft, slightly damp, and lint-free cloth to clean the speaker grills on your iPhone. 

Avoid getting any moisture in the openings of the device, and don’t use any abrasive materials or cleaning agents, as these could damage the device.

If your iPhone has been exposed to water or moisture, you should let it dry completely before cleaning the speakers. To dry it up quickly, you can use a soft, dry cloth to dab the speaker grills gently.

In addition, avoid using liquids or aerosol sprays to clean your iPhone’s speakers. These can seep into the speaker grills and damage the internal components.

If you’re unsure how to clean your iPhone’s speaker grills, you can refer to the user manual for more detailed instructions.

Why is my iPhone ear speaker muffled?

There could be a few reasons your iPhone’s ear speaker might be muffled. Here are a few possible explanations:

• Your iPhone’s ear speaker might be covered with dirt, dust, or debris. If this is the case, try cleaning your iPhone’s ear speaker with a soft, dry cloth.
• The ear speaker on your iPhone might be damaged. The ear speaker could be damaged if you’ve dropped your iPhone or been exposed to water. In this case, you can take your phone to any Apple store close to you or an authorized repair center to have it checked out.
• The volume on your iPhone might be set too low. To check and adjust the volume on your iPhone, go to Settings > Sounds & Haptics. Also, you can make use of the volume buttons on the side of your iPhone to adjust the volume.
• Your iPhone’s software might need to be updated. If your iPhone’s software is out of date, it could cause the ear speaker to sound muffled. 

To check for updates, go to Settings > General > Software Update.

If you’ve tried these steps and your iPhone’s ear speaker is still silenced, there may be a hardware problem with your iPhone. In this case, take your iPhone Apple store or an authorized repair center to have it checked out.

Conclusion

The speaker on your iPhone has several moving parts that make audio. Dirt, dust, and other particles can easily accumulate and jam the speaker, causing drumming or distortion in the sound.

But if you follow the above different methods on how to clean iPhone speaker, you will have your phone speaker back to normal with better performance.