How to Fix Overheated Airpods

If you’re experiencing overheating issues with your AirPods, it’s essential to address the problem promptly to prevent any potential damage. Overheating can occur due to a variety of reasons, such as excessive usage or exposure to extreme temperatures. In this guide, I will provide you with how to fix overheated AirPods. By following these steps, you can potentially resolve the issue and ensure the optimal performance and safety of your AirPods.

Whenever you are experiencing overheating issues with your AirPods, here are some steps you can take to fix the problem. 

First, remove the AirPods from your ears to allow them to cool down. Find a cool and well-ventilated area to place them, avoiding direct sunlight or heat sources. 

Check for firmware updates by connecting your AirPods to your iOS device and checking for any available updates in the Settings app. If an update is available, install it. 

If the issue persists, try resetting your AirPods by placing them in the charging case, keeping the lid open, and pressing and holding the setup button until the LED indicator flashes amber. 

After resetting, reconnect them to your devices and check if the overheating problem is resolved. If none of these steps work, it is recommended to contact Apple Support for further assistance, as they can provide tailored guidance or arrange a repair if needed. 

Remember to address overheating promptly to avoid any potential damage to your AirPods.

Can AirPods Overheat?

Can AirPods Overheat

AirPods can overheat. Although rare, it is possible for AirPods to experience overheating issues under certain circumstances. Overheating can occur due to a variety of factors, such as prolonged usage, exposure to high temperatures, or a malfunction within the AirPods themselves. 

When AirPods overheat, they can become uncomfortable to wear, and in severe cases, it may affect their performance or even cause damage to the internal components. It’s important to address overheating issues promptly to prevent any potential harm and ensure the longevity of your AirPods.

Furthermore, overheating of AirPods can happen for several reasons. One common cause is extended usage, especially during activities that generate a lot of heat, such as intense workouts or exposure to direct sunlight. The internal components of the AirPods generate heat during operation, and prolonged usage can exacerbate this heat buildup. 

Additionally, environmental factors like high ambient temperatures or storing the AirPods in a hot environment can contribute to overheating.

It’s worth noting that Apple has implemented safety features in AirPods to help prevent overheating. For instance, AirPods are designed to automatically power off if the temperature exceeds a certain threshold to protect both the user and the device.

If you notice that your AirPods are overheating, it is crucial to take steps to resolve the issue. This may involve removing the AirPods from your ears and allowing them to cool down in a well-ventilated area. Avoid exposing them to extreme temperatures and direct sunlight. 

It’s also important to ensure that your AirPods are running the latest firmware version, as updates often include bug fixes and performance improvements.

Can Airpods Get Too Cold?

AirPods can be negatively affected by extremely cold temperatures. Here are some details:

  1. Battery life: Cold temperatures can decrease the battery life of AirPods. The battery’s performance may be temporarily reduced, causing the AirPods to die more quickly.
  2. Audio quality: Extreme cold can impact the audio quality of AirPods. It may cause crackling or distortion in the sound.
  3. Physical damage: Rapid temperature changes can cause condensation to form inside the AirPods, potentially damaging the internal components. Freezing temperatures may also make the plastic casing more brittle, increasing the risk of physical damage if dropped or mishandled.
  4. Charging issues: Cold temperatures can affect the charging capabilities of AirPods. It may result in slower or incomplete charging, or the AirPods may not charge at all until they are brought back to a warmer environment.

To prevent potential issues, it is advisable to avoid exposing AirPods to extremely cold temperatures for extended periods. If you need to use them in cold conditions, it is recommended to keep them in a protective case or warm them up gradually before use.

Do Airpods Overheat in Sauna?

AirPods can overheat in a sauna. Here’s an explanation:

  1. Temperature sensitivity: AirPods are not designed to withstand high temperatures, and the heat in a sauna can far exceed their operating limits. Exposing them to extreme heat can cause internal components to overheat and potentially malfunction.
  2. Battery damage: High temperatures can negatively affect the battery life and performance of AirPods. Excessive heat can cause the battery to degrade more quickly, leading to reduced battery capacity and a shorter overall lifespan.
  3. Physical damage: In addition to the internal components, the external casing of AirPods can also be vulnerable to heat. Prolonged exposure to sauna temperatures can cause the plastic or metal components to become too hot to touch, potentially resulting in burns or other physical damage.

To protect your AirPods, it is strongly recommended to keep them away from saunas or any environment with extreme heat. 

If you plan to use them in a warm environment, make sure to remove them from the sauna beforehand and allow them to cool down to a safe temperature.

Can AirPods Overheat in the Car?

Can AirPods Overheat in the Car

AirPods themselves are not likely to overheat in a car, as they have built-in mechanisms to regulate temperature. However, extreme temperatures in a car, especially if it is hot, can negatively affect the battery life and overall performance of AirPods. It is generally recommended to avoid leaving AirPods in a hot car for prolonged periods to maintain their optimal condition.

High temperatures in a car can impact the battery life and performance of AirPods. Lithium-ion batteries, which are used in AirPods, are sensitive to heat and can degrade faster when exposed to extreme temperatures. Prolonged exposure to heat may cause the battery to deteriorate, resulting in reduced battery capacity and shorter usage time.

Additionally, excessive heat can also affect other components of the AirPods, such as the charging case and the electronics inside. It is important to note that extremely cold temperatures can also have adverse effects on the functionality of AirPods, although overheating is generally a more common concern.

To protect your AirPods, it is recommended to avoid leaving them in a car for an extended period, especially in hot weather. If you need to store your AirPods in the car, it is best to keep them in a cool and shaded area, such as the glove compartment or a bag, to minimize exposure to direct sunlight and heat.

What Happens If Your AirPods Overheat?

If AirPods overheats, it can lead to several potential issues. The battery life and overall performance may be negatively affected. In extreme cases, overheating can cause damage to the internal components, such as the battery or circuitry.

It is important to avoid exposing AirPods to high temperatures and remove them from direct sunlight or hot environments. If you notice your AirPods overheating, it is recommended to let them cool down in a well-ventilated area and contact Apple support if the issue persists.

When AirPods overheats, it could indicate a malfunction or an underlying problem. Overheating can cause discomfort or even injury if they are in direct contact with your ears. In addition, excessive heat can degrade the battery life and reduce the overall lifespan of the AirPods.

If your AirPods overheat, it is important to take immediate action. Here are some steps you can take:

  1. Remove them from your ears: Take the AirPods out of your ears and give them some time to cool down. This will help prevent any discomfort or potential injury.
  2. Disconnect from devices: If the AirPods are connected to a device, such as an iPhone or iPad, disconnect them to prevent further usage while they are overheating.
  3. Move to a cool environment: Place the AirPods in a well-ventilated area away from direct sunlight or any other sources of heat. Allowing them to cool naturally is crucial.
  4. Reset and update: After the AirPods have cooled down, you can try resetting them by pressing and holding the setup button on the charging case until the LED indicator flashes. Additionally, ensure that your AirPods and connected devices are updated to the latest software version.
  5. Contact Apple support: If your AirPods continue to overheat or if you notice any other issues even after following the above steps, it is recommended to contact Apple support or visit an authorized service center for further assistance.

Remember, prevention is key. To avoid overheating, it’s best to keep your AirPods in a cool and dry environment, away from extreme temperatures or excessive moisture. 

Taking proper care of your AirPods and following Apple’s guidelines can help maintain their performance and prolong their lifespan.

Can Heat Damage Your Airpods?

Heat can potentially damage your AirPods. Excessive heat can affect the internal components and battery of the AirPods, leading to performance issues or even permanent damage. It is recommended to avoid exposing your AirPods to high temperatures, such as leaving them in direct sunlight or near heat sources like radiators or ovens. 

Additionally, it’s important to store and charge your AirPods in a cool and dry environment to prevent heat-related damage.

Furthermore, prolonged exposure to high temperatures can cause the battery in your AirPods to degrade faster, reducing its overall lifespan. Heat can also affect the adhesive that holds the various components together, potentially causing them to come apart.

 Also, extreme heat can warp or melt the plastic housing of the AirPods, compromising their structural integrity. To ensure the longevity of your AirPods, it’s best to keep them away from excessive heat and store them in a cool, dry place when not in use.

How Do I Revive My Airpods?

How Do I Revive My Airpods

If your AirPods are not working as expected and you’re looking to revive them, there are several steps you can take to troubleshoot and potentially resolve the issue. By following these steps, you can check the battery, reset the AirPods, clean them, update the firmware, and try them with a different device.

To revive your AirPods, you can try the following steps:

  1. Check the battery: Ensure that the AirPods and the charging case have sufficient charge. Place the AirPods in the charging case and connect the case to a power source using the Lightning cable.
  2. Reset the AirPods: Open the lid of the charging case and press and hold the setup button on the back of the case until the LED light on the front starts flashing amber. Release the button and then re-pair the AirPods with your device.
  3. Clean the AirPods: If there is any debris or dirt blocking the charging contacts or the speaker mesh, gently clean them using a soft, lint-free cloth. Be careful not to push any dirt further into the AirPods.
  4. Update firmware: Make sure your AirPods and the device they are connected to are running the latest software updates. Check for updates on your iOS or macOS device and install any available updates.
  5. Try a different device: Test your AirPods with a different device to determine if the issue is specific to your current device. If they work fine with another device, there may be a problem with the original device’s settings or software.
  6. Contact Apple Support: If none of the above steps work, it’s recommended to contact Apple Support or visit an authorized service provider for further assistance or repair options.

Note: These steps may not solve all issues, and it’s important to refer to official Apple support documentation or contact Apple directly for specific troubleshooting guidance tailored to your situation.

Why Is My Left Airpod Hot and Not Working?

If your left AirPod is hot and not working, it could indicate a potential issue with the device. Here are some possible reasons for this problem:

  1. Battery or charging issue: Overheating can occur if there is a problem with the battery or the charging mechanism. Check if the AirPods are properly charged and try resetting them.
  2. Software or firmware problem: Sometimes, software or firmware glitches can affect the performance of AirPods. Ensure that your AirPods and the connected device have the latest updates installed.
  3. Moisture or sweat damage: Excessive moisture or sweat exposure can cause damage to the internal components of the AirPods. If you have been using them during physical activities, it is possible that sweat has affected their functionality.
  4. Hardware damage: Physical damage, such as a dropped or impacted AirPod, can lead to internal hardware issues. Inspect the AirPod for any visible signs of damage, and consider contacting Apple Support or an authorized service provider for assistance.

To troubleshoot the problem:

  1. Try resetting your AirPods by going to the Bluetooth settings on your device and forgetting the AirPods. Then, put the AirPods in their case, close the lid, and wait for a few seconds before reopening the lid and repairing them.
  2. Clean the AirPods: Use a soft, lint-free cloth to gently clean the AirPods, especially the charging contacts.
  3. If the issue persists, contact Apple Support or visit an authorized service center for further assistance. They can help diagnose the problem and provide appropriate solutions or repairs.

Do Airpods Burn Out?

AirPods, like any electronic device, can experience issues that may lead to malfunction or failure over time. Here are some reasons why AirPods may stop working or “burn out”:

  1. Battery degradation: Over time, the battery in AirPods can degrade, resulting in reduced battery life or the inability to hold a charge. This can happen due to normal wear and tear or if the AirPods are frequently used and charged.
  2. Water or liquid damage: AirPods are not water-resistant or waterproof. Exposure to excessive moisture or immersion in water can damage the internal components, leading to malfunction or complete failure.
  3. Physical damage: Accidental drops, impacts, or mishandling of AirPods can cause internal components to become dislodged or damaged. This can result in issues such as one AirPod not working, audio distortion, or complete failure.
  4. Software or firmware glitches: Like any electronic device, AirPods can experience software or firmware issues. These glitches can cause connectivity problems, audio disruptions, or other malfunctions.
  5. Aging and general wear: Over time, the components inside AirPods can deteriorate due to regular usage. This can result in decreased audio quality, weakened connections, or other issues.

To mitigate these potential problems, it is recommended to:

  • Avoid exposing AirPods to excessive moisture or liquids.
  • Handle AirPods with care, avoiding accidental drops or impacts.
  • Clean AirPods regularly using a soft, lint-free cloth.
  • Keep AirPods updated with the latest software or firmware versions.

If your AirPods are experiencing issues, you can try the following troubleshooting steps:

  1. Ensure the AirPods are fully charged and properly connected to the device.
  2. Reset the AirPods by forgetting them from the Bluetooth settings and repairing them.
  3. Clean the charging contacts on both the AirPods and the charging case.
  4. If the problem persists, contact Apple Support or visit an authorized service center for further assistance and potential repair options.

Remember, the lifespan of AirPods can vary depending on usage, care, and environmental factors. It is advisable to refer to the manufacturer’s guidelines and seek professional assistance if necessary.

What Can Damage Your Airpods?

What Can Damage Your Airpods

AirPods have become increasingly popular as wireless earphones, providing convenience and high-quality sound for many users. However, it’s important to be aware of potential risks that can damage these devices. In this guide, we will explore the factors that can potentially harm your AirPods. 

By understanding these risks, you can take the necessary precautions to protect your investment and prolong the lifespan of your AirPods. From water damage to physical impacts and other common causes, let’s delve into the details of what can damage your AirPods and how to avoid such situations.

Several factors can potentially damage your AirPods. Here are some common causes:

  1. Water and moisture: AirPods are not waterproof or water-resistant. Exposure to water or excessive moisture can damage their internal components and render them unusable.
  2. Impact and physical damage: Dropping, crushing, or subjecting your AirPods to strong impacts can result in various forms of damage, such as broken casings, malfunctioning buttons, or damaged audio drivers.
  3. Extreme temperatures: Extreme heat or cold can adversely affect the battery life and performance of your AirPods. It is best to avoid exposing them to extreme temperature conditions.
  4. Poor maintenance: Failing to clean your AirPods regularly can lead to the accumulation of dirt, debris, or earwax, which may clog the speaker grilles or affect the audio quality.
  5. Incompatible charging accessories: Using third-party chargers or accessories that are not certified by Apple can potentially damage the AirPods’ charging case or battery.
  6. Software or firmware issues: Software bugs or glitches, as well as failed firmware updates, can cause performance issues or even render your AirPods inoperable. Keeping your AirPods and connected devices up to date helps minimize such risks.

To ensure the longevity of your AirPods, it is advisable to handle them with care, store them properly, keep them clean, and avoid exposing them to extreme conditions or incompatible accessories.


If you notice that your AirPods have overheated, it’s important to address the issue promptly to prevent further damage and ensure their safe operation. Here is how to fix overheated AirPods.

  1. Remove them from your ears and allow them to cool down naturally. Avoid using or charging them while they are still hot.
  2. Disconnect your AirPods from any connected devices and turn off Bluetooth on those devices to minimize any potential strain on the AirPods.
  3. Inspect your AirPods for any visible signs of damage, such as melted or distorted parts. If you notice severe damage, it is recommended to contact Apple Support or visit an authorized service provider for assistance.
  4. Once the AirPods have cooled down, clean them gently using a soft, dry cloth to remove any dust or debris that may have accumulated.
  5. If the overheating issue persists or if you have concerns about the safety of your AirPods, it is advisable to contact Apple Support or visit an authorized service provider for further assistance. They can provide guidance or offer repair options if necessary.

Remember, prevention is key to avoiding overheating issues. Be sure to use your AirPods in a well-ventilated area, avoid exposing them to excessive heat sources, and follow proper charging practices.