Airpods are used with Phones and laptops to listen to music and watch movies. It helps in listening to sounds where there is noise or in public places. Despite this device’s good features, most people ask this question: why are my AirPods so quiet?
To get why your Airpod is quiet, check if your Airpod is not dusty or dirty. You can also check your phone or laptop volume setting to see if the settings are correct. If that doesn’t work, check if your phone is not in low power mode or the battery is low.
In addition, the Airpod might have Bluetooth synchronization issues with your phone or laptop. All these factors can cause a low sound in an Airpod.
However, if the Airpod is not faulty, it is expected to last longer; this can be achieved through proper handling and adequate maintenance.
Why Are My Airpods Quiet?
Several factors can be responsible for the low volume you are experiencing with your Airpod; it can be a technical issue or the one you caused yourself. With all these factors, it is difficult to single out a fault responsible for your quiet Airpod.
You might only get the desired solution that you want once you check for the faults that are listed below.
Here are things to look out for when you have issues with the volume of your Airpod:
1. Your Airpod is dusty or dirty
2. Volume limit on Phone or Laptop
3. Phone/Laptop low battery mode
4. Airpod Low Volume
5. Bluetooth synchronization issues
6. Volume equalizer settings
5. Your iPhone/Mac needs to be updated
4. Software issue
5. Hardware Issue
1. Your Airpod is dusty or dirty
Dust and dirt can cause a lot of damage to the inside of your Airpod and make it less effective at transmitting sound.
Using your Airpod in a dusty environment will attract dust, and with time, it will block the Airpod surface. It will prevent the free flow of sound and make it look quiet when the dust is too much.
Aside from the dust, misusing the Airpod without giving any care can make t dirty over time. And when this dirt accumulates too much on the surface of the pod speaker where the sound is coming out, the volume will reduce to being quiet.
After detecting this, all you need to do is avoid using it in a dusty area. And if you will use it, it needs to be cleaned with a soft brush after every use.
Also, it needs to be properly used or regularly cleaned to avoid dirt. And when you are cleaning it, kindly avoid using water, harsh or any sharp object.
To clean your Airpod, follow these steps:
1. Unbox your Airpod and remove the battery from its charging case
2. Take out the charging case and wipe down each side with a towel
3. Put back both pieces of the Airpod together and put them back into the charging case
2. Volume limit on Phone or Laptop
The volume limit of phones is different, especially if their model is different. Because one phone is very loud with your Airpod doesn’t mean it will have the same volume as another. That’s why you need to be sure about the volume limit of your phone before taking any further steps.
The same thing can apply to a laptop; You should expect a different volume for all laptops when used with an Airpod. For compatibility’s sake, it’s best to use the same brand of laptop and Airpod.
In addition, the volume limit on your phone or laptop is controlled by a software setting. If you want to hear your AirPods at maximum volume, you’ll need to find the right setting in your device’s settings, which may vary from device to device.
To test the sound level for your AirPods, plug them into a device with a headphone jack and turn up the volume until you can’t hear any background noise. If the sound is too quiet, try turning down the volume until they’re just barely audible.
Note that this will also affect your smartphone’s audio output, so ensure it’s quiet enough.
3. Phone/Laptop low battery mode
The level of your phone battery can make your Airpod volume very low. If the batter is low, it automatically switches to low power mode. So when this happens, you can experience a quiet Airpod.
The same will happen when your laptop battery is low, especially when you set it to battery-saver mode. So whenever you set your device to power saver mode, you might not get some function working at full capacity.
And how can you solve this? Always make sure your phone or laptop is changed. Try to plug it into a power source when it’s low.
However, if you want your laptop or Airpod to play the low battery sound when it hits 20%, open the settings app and go to Sounds > Battery. Under “Use Low Power Sound,” select “On” and click OK.
4. Airpod Low Volume
When you use your Airpod without charging it, it will low and stop playing music when it’s dead.
You will get an indication that the Airpod is getting low through a voice notification telling you it’s getting low.
Meanwhile, it’s better to use one Airpod instead of two to save battery. When you use one, you can leave the other in the case. To make this possible, always leave your Airpod case charged.
5. Bluetooth synchronization issues
Bluetooth is a feature that connects your Aipod to your phone or laptop. And if there is a connection issue between the two devices, you definitely won’t get any sound.
To get this issue fixed, make sure your phone’s Bluetooth is connected to be sure both devices are ready to work with each other.
If the nonconnection persists, you will need to reset, like removing all paired devices to the phone or laptop, and then repair afresh to your Airpod.
Ensure the settings are correct so you can successfully pair without difficulties.
Here is a guide:
1. Make sure Bluetooth is turned on
2. Find out which pairing process your device employs
3. Turn on discoverable mode
4. Ensure the two devices are close to each other.
5. Power the devices off and back on.
6. Remove old paired Bluetooth connections.
6. Volume equalizer settings
Volume equalizer can be another culprit for quiet Airpod. You might have tampered with it unknowingly, or you need to learn how to do it correctly.
If the equalizer setting needs to be done the right way to support and free, you can continue having some challenges with the Airpod volume. The bass might be too high or low; this can cause it.
To fix this, you must go back to the product manual to check for the correct settings for the equalizer.
The volume equalizer settings on your AirPods can be found on your iPhone’s Control Center app. You’ll find this app by swiping up from the bottom of your screen and tapping “Settings” or “Control Center.” Then tap “Volume,” and you’ll see a list of options for adjusting the volume of your audio.
The first option is to adjust the overall volume and if you want to make it louder or quieter, slide the wheel up or down until you get what feels right.
Another option is to adjust individual volumes of different parts of an audio file (e.g., each track). It allows you to balance out other parts of an audio file so they’re not too loud or quiet but still audible enough without muddying up everything else around them.
This feature works best when multiple tracks are playing at once; otherwise, it can get tricky when there’s only one track playing at once; try using this setting instead.
7. Your iPhone/Mac needs to be updated
If your phone is not updated, there are chances that some functions will not be working as they ought to. If you discover this, you should update it so you can know where the fault is really from.
Generally, your AirPods were designed to work with the iPhone and Mac. If you have an old operating system, your AirPods may not work properly.
And, if you’re using an older operating system, such as Mac OS X 10.6 or older, your AirPods may not work unless they are updated to iOS 12.
8. Software issue
Software issues are internal issues that happen on the panel of the Airpod; these faults are always complicated to fix as it’s not what you can see until you open the device.
A technical person that is an expert in fixing Airpod will be the one that can open it. Or you can return it to the store where you bought it.
Although they have software that adjusts the volume of each Airpod speaker based on what you’re listening to. If you’re listening to something with much basses, like an EDM track, the Airpods will pump out more bass.
If you’re listening to something with more trebles, like an acoustic guitar, the Airpods will pump out more treble.
So the AirPods are set to adjust the volume based on ambient noise automatically, but if you’d like to use your volume control, you can do that by following these steps:
1. Click on Settings on your iPhone or iPad
2. Tap General and then Accessibility
3. Select Hearing
4. Under Hearing Difficulty Levels, select Speech and then press Done to return to the main menu
5. Select Volume Limit at the bottom of the menu and then choose Custom Level from the pop-up menu next to the “Normal” level.
9. Hardware Issue
This issue can be detected on the outer part of the Airpod, which is mainly attributed to the functions and buttons casing.
If you’re experiencing a hardware issue with your Airpods, try the following steps:
1. Make sure that your AirPods are fully charged
2. Ensure that you have the latest version of the iOS software on your iPhone or iPad
3. Check to see if there is a software update available for your Airpods
4. Check to see if there is an updated version of the firmware in your AirPod case
Why Are My Airpods So Quiet After Cleaning?
After cleaning your Airpod the wrong way, they are tendencies it might stop or have a lower volume.
If you clean your Aipod with too much water, the water can find its water in the speaker space and cause some damage by blocking the surface.
However, if you use a soft cloth or tissue and only spray some water on it, the sound quality will remain intact, and you can enjoy listening to music without worrying about turning up your speakers.
Why Are My Airpods So Quiet on Laptop?
Depending on the model of your laptop, you might get different volumes across laptops. Also, the Bluetooth settings on the laptop can be a culprit if it needs to be better set to match the Airpod settings.
Also, the compatibility of your laptop with the Airpod can affect the sound transmission between both devices. That is why it is important to check if they pair well before concluding the Airpod is faulty.
So if you’re experiencing this issue on your laptop, Here is a guide to help you:
Try turning off Bluetooth altogether by going into Settings > Bluetooth & Airplay and turning off “Allow Bluetooth Audio.” It will turn off all wireless connections from any device until you turn them back on again late. It will fix the issue.
Why Are My Airpods So Quiet on Spotify?
When you are on Spotify, and you experience a low volume, it might result from the volume setting on your phone and the music app. So many things can be involved, like activating the volume limit, tampering with the volume equalizer, and turning on the low piper mode. All this can cause the Airpod to go quiet on Spotify.
Although the low-power mode allows the AirPods to use less power when they’re not being used, they’ll be able to stay connected longer and last longer between charges, which is important if you’re using them to stream music while doing something else.
Another solution to quiet Airpod when on Spotify is to install Apple Music on your computer directly from Apple or through an app like Spotify Connect (the latter being much easier). It will work when you start playing music through Spotify.
Conclusion
The question: why are my AirPods so quiet? Has been answered. If you can keep to the guide above, you can fix it yourself without damaging your Airpod.