Why do my AirPods keep disconnecting?

Sometimes you can experience a disconnection with your Airpod from your phone or Laptop. That’s why most people ask the question: why do my AirPods keep disconnecting? This post has been put together to help you find a lasting solution to this frequent occurrence. 

There can be a lot of reasons for the disconnection of your Airpod from your phone; some examples are the AirPods battery life, Bluetooth connection, and the device you are using it with. And in extreme situations, things like dirt and wax build-up in the Airpod can cause interference in the connection.

Also, there have been some bug concerns about the new updated automatic switching feature. It automatically finds a new device for you; in some cases, if it is a device you have been connected to, it can disconnect and connect to the newly discovered device.

Why do my AirPods keep disconnecting?

Why do my AirPods keep disconnecting

Your Airpod disconnection from your phone can happen for many reasons; it can be a hardware or software issue, depending on what is wrong. 

If it’s a software issue, it can be fixed within a time frame; all you have to do is try to detect the problem and where it is coming from. It can take some time to fix, but it won’t cost you money as you will still be able to retain the Airpod and not get another.

And if it’s a hardware issue, it is still fixable; most time, the Airpod not charging is the issue, but with some cleaning and checking, it can be solved.

 Some of these reasons will be explained below.:

1. Battery life

You can be busy and rush to plug your Airpod into a power source, thinking it’s charging; sometimes, both Airpod might not charge, leaving the charge and the other uncharging. In this case, it can cause a disconnection when you attempt to connect it. 

Also, this could be because the battery life on your AirPods is running low. The battery can hold up to 5 hours of talk time or 12 hours of listening time. And if you’re using your AirPods for a more extended period than that, it may soon run out of power and disconnect from your iPhone.

Another culprit is the USB cord; a poor or faulty cord can slow or not charge your Airpod. Remember to check the power source; it is not supplying power, or there is a low voltage supply.

2. Bluetooth is off

Bluetooth going off will affect the connection of the Airpod to your phone. When it disconnects, the Airpod will disconnect too.

Many factors can trigger this, like mistakenly putting your phone on Airplane mode for a long time. Or you put your phone on Airplane in the aircraft and need to remember to put it on when you highlight from the plan.

Also, likely, the connection between your AirPods and your phone needs to be stronger. It can happen if you’re in a very windy area or if you’ve recently changed locations, and the signal of each AirPod needs to be stronger to reach your phone. 

3. Selected Audio Device

When your AirPods disconnect, you may be experiencing issues with the audio device selected on your iPhone.

The problem can occur for a variety of reasons, but there are a few common ones:

  • Selected Audio Device: This is the name of your particular audio device with your AirPods. If it needs to be set up properly, it could be causing an issue.
  • Selected Audio Device Name: This is the name of your particular audio device with your AirPods. It should match whatever name you’ve given your iPhone (the computer on which it’s installed).

Ways to Fix AirPods That Keep Disconnecting From Your iPhone

1. Reconnect your AirPods

You need to reconnect your Airpod when it disconnects from your phone, but you need to do it properly. Go to settings and disconnect the Airpod and after doing this, switch off the phone’s Bluetooth. 

After doing that, return the Airpod to the case; this will reset the Airpod.

To fix this, click forget on the phone Bluetooth setting to erase it from the phone cloud profile.

Also, you can open the Airpod lid after putting the Airpod back in the case, then press the case back button for like 20 seconds until the case light changes from amber to white color.

After doing all this reset, you can reconnect the Airpod and phone. Do this by going to the phone setting, clicking on Bluetooth, and pairing the two devices together.

If you’re still having trouble reconnecting your AirPods, try the following:

1. Make sure your AirPods are fully charged.

2. Try to connect them while they are still in their case/box. If they are already in your ears and you can’t get them to connect, try taking them out and then putting them back in again.

3. Try turning off Bluetooth on both your phone and your AirPods for at least a few seconds before trying to connect them again.

4. Try using a different charging cable or case if possible (if you have one).

2. Keep Your AirPods and iPhone Closer Together

One of the most common reasons AirPods disconnect from your iPhone is that they need to be closer. If you’re using the default settings, you need to move them closer together so that they can activate their connection. 

Try moving one AirPod closer to your iPhone to use both simultaneously.

It is essential to bring two devices connected with Bluetooth closer to each other. Because the farther you put the devices apart, the more frequent the disconnection will be.

So to keep the two devices connected, keep at least 3 feet from each other.

3. Avoid Wireless Interference

Things like a wireless speaker, microwave oven, and poorly shielded power cable interfere with the connectivity of Airpod and your phone.

The same goes for any other wireless devices in your home or office: don’t use them near each other.

If that doesn’t work, try plugging in an Ethernet cord directly into your iPhone instead of using Wi-Fi or Bluetooth.

4. Turn off Automatic ear detection

This function can be done without since it’s causing some issues. 

To turn off this feature:

1. Open Settings on your iPhone.

2. Under General, tap Siri & Search.

3. Tap the toggle next to Ask to use my voice for Hey Siri at the top of the screen to turn off Auto-Ear Detection (you will still be able to use Hey Siri by pressing and holding down on the Home button).

Another way to avoid this problem is by disabling automatic ear detection while not actively using your AirPods: hold the button on each AirPod until its light begins flashing orange (or yellow). It will turn off automatic ear detection for that particular pod and allow it to connect again automatically when it detects motion close by or when you put it back into your ears.

5. Turn off the Automatic switching

This new feature was introduced a few years ago; you can find it in Mac OS and iOS14. It is better to turn it off if you use many devices with Bluetooth.

In addition, If you’re using your AirPods while connected to a charger or within range of another device, try turning off the Automatic switching feature. 

It will allow you to manually switch between Bluetooth and Wi-Fi regardless of whether other devices are using their networks.

6. Update Your iPhone

Apple updates its iPhone at an interval. With the upgrade of the latest iOS, it comes with plenty of bug fixes that could help you fix connectivity problems. So feel free to Upgrade your phone to eliminate the disconnection issue you might face.

To fix this, go into Settings > General > Software Update on your iPhone and check for updates.

If this doesn’t work, try restarting your iPhone and then trying to connect your AirPods again. Try turning off Bluetooth on both devices before this step so they can reconnect properly next time.

7. Disable Automatic Ear Detection

Disable Automatic Ear Detection

Automatic ear detection is one of the unique features of an iPhone. It allows your phone to detect your Airpod when placed in the ear.

This feature can also cause a disconnection between the two devices. You will need to reconnect it back.

Here is a step-by-step guide:

  • Open the Settings app on your iPhone
  • Tap on General and scroll down to tap “i” for “iTunes & App Store.”
  • Scroll down to find “Bluetooth” and tap on it
  • You’ll see a button that says “Off” next to it; tap that button and then tap “Off” again (this will turn off automatic ear detection)

8. Update the Firmware on Your AirPods

An outdated Airpod firmware can cause it to keep disconnecting from the phone when connected.

For an older version of the firmware on your AirPods, you can check for updates by going into Settings to General to Software Update on your iPhone. If there are no updates available, then go ahead and update.

Once updated, try turning off Bluetooth on your AirPod and phone before turning them back on. It should help reset any issues causing problems so they can be resolved.

9. Reset the Network Settings

Resetting your network is needed to resolve corrupted setting disrupting Bluetooth connection.

To do this:

1. Open the Settings on your device, then select “AirPods” under “General,” and then select “Reset Network Settings.”

2. Follow the steps to complete the reset, and try using AirPods again.


Every answer you need to the question: why do my AirPods keep disconnecting? It has been fully answered above. The question is not just answered, but a solution has been provided. 

Take your time to test and apply them one after the other to detect the one that will solve the problem.