Why Is One Airpod Louder Than the Other

Have you ever noticed and asked why is one airpod louder than the other? This is a common issue among AirPod users and can be caused by a variety of factors. As you read on, we will explore the possible reasons why one AirPod may be louder than the other and offer solutions to fix the problem.

So, why is one AirPod louder than the other? The most common reason is due to a blockage in the earbud, such as earwax or debris. This can cause the speaker to malfunction and produce less sound on one side. Another reason could be a software glitch or a malfunctioning sensor on the AirPod.

Additionally, it could be due to an imbalance in the volume levels on your device or a problem with the audio settings on your device.

Whatever the cause, it’s important to address the issue as soon as possible to ensure an optimal listening experience. In this blog post, we will provide step-by-step instructions on how to troubleshoot and fix the problem, including cleaning your AirPods, adjusting the volume levels, and checking for software updates.

We will also offer tips on how to maintain your AirPods and prevent the problem from occurring in the future. So, whether you’re dealing with a loud AirPod or just want to ensure that your listening experience is as enjoyable as possible, this guide will provide all the information you need.

Causes of Uneven Volume in Airpods

There are several causes of uneven volume in AirPods, some of the most common include:

Blockage in the earbud: Earwax or debris can build up in the speaker and affect the sound quality.
Software glitch or malfunctioning sensor: AirPods are controlled by software, and a software glitch or malfunctioning sensor can cause one AirPod to produce less sound.
Imbalance in the volume levels: If the volume levels on your device are not balanced, it can cause one AirPod to be louder than the other.
Audio settings: The audio settings on your device, such as EQ settings, can also affect the volume levels on your AirPods.
Battery Issues: If one AirPod battery is low than the other, that may cause a volume difference.
Physical damage: if one AirPod is damaged, it can also cause a volume difference.

It’s important to note that the cause of uneven volume can vary from person to person and may require different troubleshooting steps.

How to Fix Uneven Volume in Airpods

There are things you can try to fix uneven volume in your AirPods:

Check the volume level on your device: Make sure that the volume on your device is set to an appropriate level. Sometimes, uneven volume can be caused by the device being set to a low volume.
Check the balance: Go to Settings > Accessibility > Audio/Visual > Balance and make sure that the balance is set to the center.
Clean your AirPods: Make sure that your AirPods are clean, as dirt and debris can affect the sound quality. Clean your AirPods by gently wiping them with a dry cotton swab or a dry, soft-bristled brush.
Reset your AirPods: Try resetting your AirPods by putting them back in the charging case, then holding the button on the back of the case for 15 seconds. Once the light on the front of the case starts flashing white, take the AirPods out of the case and reconnect them to your device.
Restart your device: Sometimes, restarting your device can fix the problem.
Update your AirPods software: Make sure that your AirPods software is up to date.
If none of the above steps work, it might be a hardware issue, contact Apple support or if the Airpods are out of warranty, visit an authorized technician.

It’s always best to try the simplest solutions first before moving on to more complex ones. If none of the above steps work, it’s possible that you may have a hardware issue and should contact Apple support.

Troubleshooting Tips for Uneven Volume in Airpods

Troubleshooting uneven volume in AirPods can be a bit tricky, but there are a few things you can try to fix the problem. Here are some tips to help you troubleshoot the issue:

Make sure that both AirPods are securely seated in your ears. Sometimes, one AirPod may not be fully seated in the ear, which can cause uneven volume. Adjust the fit of the AirPods to ensure that they are properly seated in your ears.
Clean the AirPods and the earbuds. Earwax and other debris can accumulate on the AirPods and earbuds, which can affect the audio quality. Use a dry, soft-bristled brush or a dry cotton swab to gently clean the AirPods and earbuds.
Check the volume level on your device and make sure that it is set to the desired level. It’s possible that you may have accidentally turned the volume down or up on your device, which can cause uneven volume in the AirPods.
Check the audio balance settings on your device and adjust them as needed. Some devices have an audio balance setting that allows you to adjust the volume levels of the left and right channels separately. Make sure that the audio balance is set to the desired level.
Check the settings on your audio app; some apps have their own volume controls. Some music or podcast apps have their own volume controls, so make sure that the volume is set to the desired level in the app.
Check if you have enabled the Reduce Loud Sounds option on your device; if so, try disabling it. This option can reduce the volume of loud sounds, which can cause uneven volume.
Try resetting your AirPods by placing them back in their case and holding down the button on the back of the case for 15 seconds. This will reset the AirPods and can fix some audio issues.
If everything doesn’t work, contact Apple support for further assistance. They can help you troubleshoot the issue and provide additional support if needed.

How to Adjust Volume on Individual Airpods

To adjust the volume on individual AirPods, you can use the volume buttons on the side of your iPhone, iPad, or iPod touch. Press the volume up or down button to increase or decrease the volume.

If you’re using an Android device, you can use the volume buttons on the side of your device or the volume controls in the app that you’re using to play audio.

Alternatively, you can also adjust the volume on individual AirPods using Siri commands. To increase or decrease the volume, simply say, “Hey Siri, turn up/down the volume.”

How to Check for Debris or Earwax in Airpods

To check for debris or earwax in your AirPods, follow these steps:

Begin by removing your AirPods from your ears. It’s best to do this when the AirPods are not in use, as you’ll be able to see any debris or earwax more clearly.
Next, locate the small openings on the bottom of each AirPod. These openings are where sound is emitted from the speakers and also where debris and earwax can accumulate.
To remove debris or earwax, you can use a soft-bristled brush, such as a toothbrush. Gently brush the openings with the brush to remove any debris or earwax. You can also use a dry cotton swab to gently remove any debris you may find.
If you still see debris or earwax in the openings, you can use a small amount of rubbing alcohol on a cotton swab to clean the openings. Be sure to use a clean cotton swab and a small amount of alcohol, as too much can damage the AirPods.
After cleaning, dry the AirPods thoroughly before putting them back in your ears. It’s best to use a microfiber cloth or a lint-free cloth to dry the AirPods.
Once you’ve finished cleaning your AirPods, you may want to test them to ensure that they’re working properly. To do this, simply put the AirPods back in your ears and play some music or a podcast.
It’s important to note that you should avoid using sharp objects, such as toothpicks, to clean your AirPods, as this could damage the speakers. Also, Do not submerge your AirPods in any cleaning agents or expose them to high heat or humidity.
It is also recommended to clean your AirPods regularly, at least once a month, to ensure that they’re working properly and to prolong their lifespan.

How to Calibrate Airpods for Equal Volume

To calibrate your AirPods for equal volume, you can follow these steps:

Put your AirPods in your ears and connect them to your device.
Open the Settings app on your device and go to “Accessibility.”
Scroll down and select “Audio/Visual.”
Under the “Hearing” section, toggle on “Balance.”
Use the slider to adjust the volume balance between the left and right AirPods. You can also use the “Play” button to test the volume balance.
Once you’ve found the right balance, tap “Done” to save your settings.

Alternatively, you can also adjust the volume balance using the Volume Limit setting in the AirPods settings on your iPhone or iPad. To access the setting, open the Settings app, tap “Bluetooth,” tap the “i” icon next to your AirPods, and then tap “Volume Limit.”

It’s also important to note that you can also adjust the volume balance using the volume controls on your device or by using Siri commands.

If the above steps don’t work, try resetting your AirPods. To reset your AirPods, place them in the case, make sure the lid is open, and press and hold the setup button on the back of the case for at least 15 seconds until the status light starts flashing white.

Keep in mind that the above steps are for AirPods Pro and AirPods 2nd generation and above; for the first-generation AirPods, the volume balance can be adjusted only via the device.

How to Check for Firmware Updates on Airpods

To check for firmware updates on AirPods, you will need to have them connected to an iPhone or iPad. Then follow these steps:

Open the “Settings” app on your iOS device
Tap “General”
Tap “About”
Tap “AirPods”
If an update is available, you will see a “Firmware Version” section with a button to install the update.

Alternatively, you can also check for updates by opening the case with AirPods inside and then holding the button on the back of the case until the light starts flashing white. Then you will open the AirPods Pro case near your iPhone or iPad.

A setup animation will appear on the device’s display. If an update is available, you will be prompted to update.

How to Check for Water Damage in Airpods

To check for water damage in AirPods, you can visually inspect the charging case and AirPods for any signs of water or moisture. Also, you can check the battery life of the AirPods and see if they are charging properly.

Another way to check for water damage is to check the audio quality of the AirPods by playing music or making a phone call. If the audio quality is poor or the AirPods are not functioning properly, it may indicate water damage.

Additionally, you can check for water damage using the Battery Health feature in the AirPods settings on your iPhone or iPad. If the AirPods show a “Water Damaged” message, it indicates that they have been exposed to water and may not be functioning properly.

Another option is to check the liquid contact indicator (LCI) on the AirPods. This is a small dot on the inside of the AirPods that will turn red if it has been exposed to water.

It’s important to note that if your AirPods have been exposed to water or other liquids, you should dry them off as soon as possible and avoid using them until they are completely dry. If the AirPods have been damaged by water, they may not be covered under warranty.

Recommended post: How To Skip Songs With Airpods Pro

How to Reset AirPods to Fix Uneven Volume

To reset your AirPods and fix uneven volume, follow these steps:

Make sure that your AirPods are in their charging case and that the case has enough charge.
On your device, go to “Settings” > “Bluetooth” and tap the “i” icon next to your AirPods.
Tap “Forget this Device” and confirm your choice.
Open the lid of the charging case and press and hold the button on the back of the case. Wait until the LED light on the front of the case starts flashing white.
On your device, go to “Settings” > “Bluetooth” and look for your AirPods.
Tap on “Connect” and then try adjusting the volume on your AirPods.

If the problem persists, try resetting your AirPods again, or contact Apple support for further assistance.

How to Clean Airpods to Fix Uneven Volume

To clean AirPods and fix uneven volume, you can follow these steps:

Remove the AirPods from your ears and place them in the charging case.
Use a dry, soft-bristled brush or a soft-tipped toothbrush to gently brush away any debris or dust from the speaker meshes on the AirPods.
Use a dry cotton swab to clean the microphone and sensor.
Use a dry, lint-free cloth to wipe down the exterior of the AirPods, including the charging case.
Make sure the AirPods are dry before placing them back in the charging case or using them.
Connect them to your device and check if the volume issue is resolved. If not, resetting your Airpods or contacting Apple support can also help.

Note: Never use water or cleaning solutions to clean AirPods.

How to Check Battery Levels of Individual Airpods

You can check the battery levels of individual AirPods in several ways:

On an iPhone, iPad, or iPod touch: Open the “Settings” app, then tap “Battery.” You will see the battery levels of your connected AirPods and their charging case.
On an Android device: Use the “Find My” app to check the battery levels of your AirPods.
On a Mac: Open the “Finder” app and click on “AirPods” in the sidebar. You will see the battery levels of your connected AirPods and their charging case.
On a Windows PC: Use the “Bluetooth and other devices” settings to check the battery levels of your AirPods.
With Siri: Say, “Hey Siri, what’s the battery level of my AirPods?” to get the battery level of both AirPods.
With the Airpods themselves: Put them in your ears and say “Battery level” to hear the battery level of the AirPod you have in your ear.

How to Check If One Airpod Is Disconnected

You can check if one AirPod is disconnected by following these steps:

Put both AirPods in your ears.
Open the “Control Center” on your iPhone or iPad by swiping down from the top-right corner of the screen (or swiping up from the bottom of the screen on an iPhone X or later)
Find the audio controls and check if both AirPods are showing as connected.
If one AirPod is disconnected, it will show as “Not Connected.”
You can also open the “AirPods” screen in the “Settings” app to check the connection status of your AirPods.
If one AirPod is disconnected, you can reconnect it by placing it back in its charging case, then opening the lid and removing it again. The AirPod should automatically reconnect to your device.
Additionally, you can also check the battery level of individual AirPods to see which one is disconnected or has a low battery.

How to Use the Volume Control on the Airpods Case

The AirPods case does not have a built-in volume control feature. The volume control for AirPods is done through your connected devices, such as an iPhone, iPad, or Mac. You can adjust the volume using the volume buttons on your device or by using the volume slider in the Control Center on an iPhone or iPad or in the menu bar on a Mac.

Alternatively, you can also control the volume on your AirPods by using Siri, by saying, “Hey Siri, turn the volume up/down,” or by asking, “what’s the volume at?”

Additionally, you can also control the volume on your AirPods by using the force sensors on the AirPods themselves by tapping on the stem of the AirPod to increase or decrease the volume.

How to Use Siri to Adjust Volume on Airpods

You can use Siri to adjust the volume on your AirPods by using the following commands:

To increase the volume, say, “Hey, Siri, turn up the volume.”
To decrease the volume, say, “Hey, Siri, turn down the volume.”
To set the volume to a specific level, say, “Hey Siri, set the volume to (insert number between 1 and 10)”.
To mute or unmute the volume, say, “Hey, Siri, mute/unmute the volume.”
To know the current volume level say, “Hey Siri, what’s the volume at?”

Remember that you need to have “Hey Siri” enabled on your device for these commands to work. And also, your Airpods should be connected to the device for Siri to work on it.

Additionally, you can also control the volume on your AirPods by using the force sensors on the AirPods themselves by tapping on the stem of the AirPod to increase or decrease the volume.

Conclusion

To summarize the topic, why is one Airpod louder than the other? It could be due to a variety of reasons. Some of the most common causes include earwax buildup, debris in the speaker meshes, or a software issue.

To fix the problem, it’s important to first clean your AirPods and make sure they are free of debris. If that doesn’t work, you may need to reset your AirPods or contact Apple support for further assistance.

Additionally, you can also check if the volume issue is caused by a problem with your connected device, such as an iPhone or iPad, by adjusting the volume on those devices and checking if the problem persists. In any case, the best way to ensure that your AirPods are working is to keep them clean and handle them with care.